John Keats Primary Free School opened to reception pupils in September 2018 and occupies the first two floors of a new residential development in South Bermondsey, London. It will eventually cater for 420 pupils up to year six.
BEG was selected to supply the presence and motion sensors for the school as the products offer the dual benefits of complete lighting flexibility to ensure that the building is fully energy efficient, while helping to create an excellent learning environment.
The new school has high ambitions for its pupils and, with the building designed with education in mind, the lighting had to be designed and controlled in a way that would maximise the pupils’ comfort, concentration and alertness.
The lighting also needed to be automated and adjustable, with different areas requiring different lighting levels and timings, and the additional need that areas were only lit when occupied, to save energy and reduce costs.
To meet all these requirements, BEG supplied two different types of presence and motion sensors from their range of KNX products.
The sensors selected from BEG’s KNX product range for the John Keats Primary Free School project, were the PD11-KNX FLAT FC and the PD4 KNX C FC.
The super-flat PD11 sensor was selected for the classrooms and other rooms, including the headmaster’s office, as it is less than 1mm thick, making it one of the flushest and most discreet sensors on the market.
The classrooms have been set up to operate in semi-automatic mode (sometimes referred to as absence detection). This means the lights and the detector must be turned on with a wall switch.
The lights then set their brightness levels automatically and will continue to operate until there is enough natural daylight or no occupancy present in the room. Reading the level of daylight in the room, the PD11 automatically adjusts the luminaires to the required level to make sure the lighting level is always enough and make maximum use of natural light.
For the corridor areas of the school, which run nearly the entire length of the two floors, the PD4 KNX C FC was selected. The product is specifically designed to cover long corridors and so fewer devices were required to get full coverage, resulting in a reduction in time and further cost savings for the school.
The building controls, cabling and trunking was designed and installed by Neo System Automation Limited. The company used the BEG lighting sensors as part of an all-encompassing modular I/O WAGO 750 Series building control system, along with other KNX devices, to control not only lighting but heating, ventilation and air conditioning (HVAC) too.
Stephen Payne, systems sales manager at BEG, said: “BEG is proud to have been involved with this project which, not only helps this new school reduce its energy and save money from day one, but has assisted in providing the pupils with a wonderful learning environment.”
Find out more about BEG at: www.beg-luxomat.com